How to install shower curtains.
What if the bathroom in the house is too small to fit in the shower room? In fact, there is a very simple way, that is to install a beautiful shower curtains in the corresponding position of the bathroom, the shower curtain not only has a good waterproof and windproof effect, but also affordable, easy to install. The following small series will share with you the installation method and precautions of the shower curtains rod, for everyone to make a reference.
1. If the shower area has only two walls, the shower curtain rod can only be selected from the circular steel tube fixed on the wall. This fixed arc steel tube has a drawback because it is uneven due to uneven force and long time. Loose.
Second, the shower area is best to have walls on all three sides, and more importantly: the shower curtains rods are placed on the walls at both ends with a “bulging rod”. What is the expansion rod? The “expansion rod” is a telescopic iron tube. After the two sides of the head, it is fixed by a screw. The maximum load-bearing capacity of the “expansion rod” is generally 20 kg, which can be used for bath towels, and the “expansion rod” can be displaced and replaced anytime and anywhere, which is very convenient;
3. If the water-blocking strip is installed after the floor tile is installed, the glass glue that fixes the water-blocking strip needs to be silicified in 24 hours. The responsible workers will advise you not to let the glass glue be recruited within 48 hours. Psychological preparation for not taking a bath for two days.
Fourth, the natural stone retaining strip width generally has three sizes: 3 cm, 5 cm and 6 cm, 5 cm for my household, the height generally has two sizes, 1 cm and 1.8 cm, 1.8 cm for small households; I like to install the water retaining strips. It is not necessary. The height of 1.8 cm is enough. If the water surface is 1.8 cm, the floor drain has not been discharged. This is not a problem with the water barrier, but a problem with the floor drain.